Top View Inspection Items
 |  |  |  |  |
| Pinhole Alignment Roundness | Head Mark | Head Crack | Excess Material | AF / AC / OD |
Side View Inspection Items
 |  |  |  |  |
| Multi-Height Multi-Width | Chamfer Comparison | 3/4 Weld Points | Welding Points Shank OD Thread Pitch | Angle Comparison |
Top/Bottom View Inspection Items
 |  |  |  |  |
| OD,ID Concentricity | Across Flats Across Center | Pitch Number Pitch Distance | Dimension Hole Distance | Surface Flaw |
 |  |  |  |  |
| Head Crack | Feature (presence/ diameter/width/ center distance) | Mark Presence | Side Feature | Burr |
 |  |  |  |  |
| Off Center | Plating Quality | Knurl Number Height Area | Broken Pin | Thread Yes / No |
External Feature / Defect Inspection Items
 |  |  | ||
| 360 Internal Thread Damage | External Defect Inspection | 360 External Inspection |
Other Types of Parts
 |  |  |  |  |
| Oil Seal Inner Lip | Oil Seal Surface Defects | Dimensional Check U-Nuts Jaw Opening | Dimensional Check U-Nuts | Surface Inspection Powder Metallugy |
 |  |  | ||
| Surface Inspection Powder Metallugy | Bit Inspection Lobe Drive Short Of Material | Dimension Inspection O-Rings |
